| MONROmatic CAA-10
OPEN FOR REPAIR & MAINTENANCE H O W T O R E M O V E T H E C O V E R S *********************************************** Pull-out the right knob under the carriage Remove the 8 screws on the bottom Remove the 2 screws, remove the front cover Remove the 4 screws, remove the rear cover Now both side covers can be removed ... ... If neccessary: Move the carriage to the right by motor power Remove the 10s-Carry Extension-Cover ( The 2 longer screws & "pipes" on front !) R E M O V E T H E B O T T O M ********************************* Remove the 4 screws in the center of the shock absorbers Remove the bottom-plate For clearance replace the 4 screws in its positions H O W T O R E M O V E T H E C A R R I A G E *************************************************** ( If neccessary ) Screw out both left red clear-controls Remove the right red "C" control cap Remove the 3 upper front screws, remove the cover Remove the 2 HALFS (!) of the AXLE: Remove the right & left "locks" of the axle Pull-out the RIGHT (= longer!) & LEFT (= shorter) HALF Remove the KEYBOARD-FRAME: Remove the 4 screws and the 2 red caps Remove the frame Now there is access to the 2 carriage HOLDERS: Push both holders up and lift the carriage up ATTENTION to the left side: There is a "fork" to replace! |
H O W T O T A K E O U T T H E M O T O R
*************************************************
( If neccessary )
SORRY, IT WAS BAD DESIGNED...
===============================================================
(1st) It is not possible to TEST the MONROEmatic CAA manually !