H O W R E M O V E C O V E R F O R M A I N T E N A N C E ... ******************************************************************** (_1) Remove the paper roll by unscrew its axle (_2) Remove the 2 screws on front (_3) Remove the 1st (visible/left) SCREW of the PRINTING UNIT (_4) Remove the 2 screws on the (right) cover of the PRINTING UNIT (_5) Shift the cover to the right (_6) Now the 2nd SCREW of the PRINTING UNIT can be removed (_7) Lift the PRINTING UNIT !!! OBSERVE the GEAR CONNECTION (_8) Pull the [+] & [-] keys (_9) Lift the cover of the machine !!! (10) Re-Install the PPRINTING UNIT temporary ... ... Otherways FONT-BARS MAY STUCK on the plate, when operated !!! R E M A R K S T O R E S T O R A T I O N & M A I N T E N A N C E ======================================================================== (A) The motor axle has an 8-32 thread - Can be used for MANUAL OPERATION with a "TEST-CRANK" ... (B) ... A home-made CLIP was made to hold the paper roll in place ... See the CLASS-8 picture how its ORIGINAL PAPER HOLDER looks ! (C) If the machine's bottom has to take off, there is a PROBLEM: The 4 SCREWS are THIN and have an extrem SHALLOW SLOT. Take a PLIERS (like in picture) and grap its TOPS on its circumference and turn horizontally ... ... RECOMMENDATION: When you got the SCREWS, take a DREMEL and WIDEN & DEEPEN the SLOTS !!! Back to the BURROUGHS Class-9 Main Page impressum: *************************************************************************** © C.HAMANN http://public.BHT-Berlin.de/hamann 12/27/16 |