ALLEN MODEL 95
T E C H N I C A L D A T A of the Mechanical Printing - Calculator
**************************************************************************
ALLEN MODEL 95 7/7
Serial Number: 992408
Dimensions: (ca.) Width = 10_1/2" / 27 cm
Depth = 15 " / 38 cm
Height = 10 " / 25 cm
Weight: (ca.) 20 lbs / 9 kg
Mechanics: 7*9 Full-Keyboard
ROCKING-SEGMENT
Black/RED Nylon Ribbon:
1/2" * 16' / 13 mm * 5 m
( Spool-Diameter = 1_3/4" / 44 mm )
Paper Roll (Standard):
2_1/4" * 2_3/4" * 165' (W * D * L)
57 mm * 65 mm * 50 m (B * D * L)
Functions: Addition, Subtraction,
Repeat, Subtotal, Total, NonPrint
Registers: Input = 7 Decimals
Arithmetic = 7 Decimals ( = DISPLAY )
Printing = 8 Characters
Manufacturer:
ALLEN CALULATORS, INC.
New York / USA
1935
HOW TO USE the ALLEN MODEL 95
*****************************
The MANUAL can be downloaded from ...
http://www.rechnerlexikon.de/artikel/RC_Allen_Anleitungen
|
SORRY, I was not lucky with this found:
---------------------------------------
The machine was not working, but I thought I can make it ...
To open the machine, 1st remove the RIBBON-COVER. Than remove the PRINTER-
UNIT: The SCREW aside has to be removed, than slide & lift the UNIT. The
CRANK has to be removed, than the CASE. After mounting the crank again, I
saw that the ARITHMETIC was NOT to activate nor resettable with "TOTAL".
The KEYBOARD is removable as a unit: (1st) Pull the right control knobs.
(2nd) Unclip the "KBD-Reset-Bar" on front. (3rd) Remove the 4 screws. The
picture is shown upside down with keys 7-6-5-4-3-2-1 pressed ...
... The "ROCKING-SEGMENT" Coding is visible!
|
OhOh! LEVERS are MISSING - Someone used the ALLEN-95 as a "Donator" - BUT:
LUCKY now:
----------
I found another ALLEN-66 to exchange their detoriated BLACK KEYS ...
impressum:
**************************************************************************
© C.HAMANN http://public.beuth-hochschule.de/~hamann 07/19/13
|